KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Fiat 500 MOT Failure Rate & Common Faults

25% of 500 cars failed their MOT in 2024 to 2025, which is 6 percentage points above the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Fiat 500

Fail rate

25%

Pass rate

75%

Tests analysed

603,581

National fail rate

19%

Most common MOT failure reasons for the 500

Each reason is shown as a share of all 500 tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Suspension > Suspension arms > Pins and bushes

    Pin or bush excessively worn

    Major

    5%of tests

  2. Suspension > Shock absorbers

    Has an excessively worn bush

    Major

    3%of tests

  3. Suspension > Shock absorbers

    Has a serious fluid leak

    Major

    3%of tests

  4. Suspension > Suspension arms > Ball joint

    Ball joint excessively worn

    Major

    2%of tests

  5. Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)

    Efficiency below requirements

    Major

    2%of tests

Fiat 500 MOT failure rate by year of first registration

Cars first registered in 2020 have the lowest fail rate in this data (6%), and those first registered in 2009 the highest (36%). Years with fewer than 500 tests are left out.

Fiat 500 tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
200820,90236%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
200937,05336%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201038,93434%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201136,86831%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201252,77729%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201364,58326%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201476,73326%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201573,56226%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201662,52422%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201745,28516%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201847,23413%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201937,99610%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
20208,5066%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn

What to check before you buy a 500

The areas that fail most often on a 500 are suspension and brakes. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Fiat 500 MOT: quick answers

What percentage of 500 cars fail their MOT?

25% of 603,581 MOT tests (not retests) on the Fiat 500 failed in 2024 to 2025, according to DVSA data. That is 6 percentage points above the national average of 19%.

What is the most common MOT failure on a Fiat 500?

The most common reason is "Suspension > Suspension arms > Pins and bushes: Pin or bush excessively worn", found in 5% of tests.

Is a Fiat 500 reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 24,400 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Fiat MOT failure rates

Compare the 500 with other Fiat models, or browse MOT failure rates for every model.