KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Mazda 2 MOT Failure Rate & Common Faults

22% of 2 cars failed their MOT in 2024 to 2025, which is 4 percentage points above the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Mazda 2

Fail rate

22%

Pass rate

78%

Tests analysed

233,096

National fail rate

19%

Most common MOT failure reasons for the 2

Each reason is shown as a share of all 2 tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Suspension > Suspension arms > Ball joint

    Ball joint excessively worn

    Major

    6%of tests

  2. Suspension > Springs > Coil springs > Coil spring

    Fractured or broken

    Major

    4%of tests

  3. Steering > Steering linkage components > Track rod end

    Ball joint has excessive play

    Major

    3%of tests

  4. Lamps, reflectors and electrical equipment > Position lamps > Position lamp

    Not working

    Major

    3%of tests

  5. Suspension > Shock absorbers

    Has a serious fluid leak

    Major

    2%of tests

Mazda 2 MOT failure rate by year of first registration

Cars first registered in 2019 have the lowest fail rate in this data (3%), and those first registered in 2008 the highest (37%). Years with fewer than 500 tests are left out.

Mazda 2 tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
200367031%Brakes > Rigid brake pipesExcessively corroded
20041,50931%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
20051,95832%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
20062,24631%Brakes > Rigid brake pipesExcessively corroded
20074,96332%Suspension > Suspension arms > Ball jointBall joint excessively worn
200814,63737%Suspension > Suspension arms > Ball jointBall joint excessively worn
200923,06734%Suspension > Suspension arms > Ball jointBall joint excessively worn
201023,87433%Suspension > Suspension arms > Ball jointBall joint excessively worn
201120,75830%Suspension > Suspension arms > Ball jointBall joint excessively worn
201217,49227%Suspension > Suspension arms > Ball jointBall joint excessively worn
201316,98626%Suspension > Suspension arms > Ball jointBall joint excessively worn
201416,77023%Suspension > Suspension arms > Ball jointBall joint excessively worn
201519,88014%Suspension > Suspension arms > Ball jointBall joint excessively worn
201620,14612%Seat belts and supplementary restraint systems > Seat belts > ConditionRetracting mechanism defective
201715,3478%Suspension > Springs > Coil springs > Coil springFractured or broken
201816,2025%Suspension > Springs > Coil springs > Coil springFractured or broken
201916,3483%Lamps, reflectors and electrical equipment > Stop lampNot working

What to check before you buy a 2

The areas that fail most often on a 2 are suspension, steering and lamps, reflectors and electrical equipment. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Mazda 2 MOT: quick answers

What percentage of 2 cars fail their MOT?

22% of 233,096 MOT tests (not retests) on the Mazda 2 failed in 2024 to 2025, according to DVSA data. That is 4 percentage points above the national average of 19%.

What is the most common MOT failure on a Mazda 2?

The most common reason is "Suspension > Suspension arms > Ball joint: Ball joint excessively worn", found in 6% of tests.

Is a Mazda 2 reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 9,945 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Mazda MOT failure rates

Compare the 2 with other Mazda models, or browse MOT failure rates for every model.