KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Mercedes-Benz C-Class MOT Failure Rate & Common Faults

17% of C-Class cars failed their MOT in 2024 to 2025, which is 1 percentage points below the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Mercedes-Benz C-Class

Fail rate

17%

Pass rate

83%

Tests analysed

710,638

National fail rate

19%

Most common MOT failure reasons for the C-Class

Each reason is shown as a share of all C-Class tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Suspension > Suspension arms > Ball joint

    Ball joint excessively worn

    Major

    4%of tests

  2. Suspension > Springs > Coil springs > Coil spring

    Fractured or broken

    Major

    3%of tests

  3. Suspension > Anti-roll bars > Linkage ball joint dust cover

    Ball joint dust cover no longer prevents the ingress of dirt

    Major

    1%of tests

  4. Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)

    Efficiency below requirements

    Major

    1%of tests

  5. Brakes > Rigid brake pipes

    Excessively corroded

    Major

    1%of tests

Mercedes-Benz C-Class MOT failure rate by year of first registration

Cars first registered in 2021 have the lowest fail rate in this data (3%), and those first registered in 2004 the highest (33%). Years with fewer than 500 tests are left out.

Mercedes-Benz C-Class tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
199557420%Noise, emissions and leaks > Exhaust emissions > Spark ignition > Catalyst emissionsCarbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits
199677820%Noise, emissions and leaks > Exhaust emissions > Spark ignition > Catalyst emissionsCarbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits
19971,32122%Suspension > Component mounting prescribed areasPrescribed area excessively corroded significantly reducing structural strength
19981,62220%Suspension > Component mounting prescribed areasPrescribed area excessively corroded significantly reducing structural strength
19991,46822%Suspension > Component mounting prescribed areasPrescribed area excessively corroded significantly reducing structural strength
20001,09725%Suspension > Component mounting prescribed areasPrescribed area excessively corroded significantly reducing structural strength
20012,27528%Suspension > Suspension arms > Ball jointBall joint excessively worn
20024,45828%Suspension > Springs > Coil springs > Coil springFractured or broken
20038,10732%Suspension > Suspension arms > Ball jointBall joint excessively worn
200411,92433%Suspension > Suspension arms > Ball jointBall joint excessively worn
200516,10531%Suspension > Suspension arms > Ball jointBall joint excessively worn
200618,91132%Suspension > Suspension arms > Ball jointBall joint excessively worn
200724,17429%Suspension > Suspension arms > Ball jointBall joint excessively worn
200827,36728%Suspension > Suspension arms > Ball jointBall joint excessively worn
200926,16327%Suspension > Suspension arms > Ball jointBall joint excessively worn
201026,84825%Suspension > Suspension arms > Ball jointBall joint excessively worn
201139,00125%Suspension > Suspension arms > Ball jointBall joint excessively worn
201252,93625%Suspension > Suspension arms > Ball jointBall joint excessively worn
201347,86523%Suspension > Suspension arms > Ball jointBall joint excessively worn
201451,03316%Suspension > Suspension arms > Ball jointBall joint excessively worn
201568,76413%Suspension > Suspension arms > Ball jointBall joint excessively worn
201673,74110%Suspension > Springs > Coil springs > Coil springFractured or broken
201779,5769%Suspension > Suspension arms > Ball jointBall joint excessively worn
201857,0017%Suspension > Suspension arms > Ball jointBall joint excessively worn
201948,4184%Suspension > Springs > Coil springs > Coil springFractured or broken
202014,7924%Road Wheels > ConditionFractured
20213,5223%Road Wheels > ConditionFractured

What to check before you buy a C-Class

The areas that fail most often on a C-Class are suspension and brakes. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Mercedes-Benz C-Class MOT: quick answers

What percentage of C-Class cars fail their MOT?

17% of 710,638 MOT tests (not retests) on the Mercedes-Benz C-Class failed in 2024 to 2025, according to DVSA data. That is 1 percentage points below the national average of 19%.

What is the most common MOT failure on a Mercedes-Benz C-Class?

The most common reason is "Suspension > Suspension arms > Ball joint: Ball joint excessively worn", found in 4% of tests.

Is a Mercedes-Benz C-Class reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 34,112 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Mercedes-Benz MOT failure rates

Compare the C-Class with other Mercedes-Benz models, or browse MOT failure rates for every model.