KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Hyundai i10 MOT Failure Rate & Common Faults

17% of i10 cars failed their MOT in 2024 to 2025, which is 2 percentage points below the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Hyundai i10

Fail rate

17%

Pass rate

83%

Tests analysed

462,502

National fail rate

19%

Most common MOT failure reasons for the i10

Each reason is shown as a share of all i10 tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Lamps, reflectors and electrical equipment > Position lamps > Position lamp

    Not working

    Major

    2%of tests

  2. Lamps, reflectors and electrical equipment > Stop lamp

    Not working

    Major

    2%of tests

  3. Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)

    Efficiency below requirements

    Major

    2%of tests

  4. Suspension > Suspension arms > Ball joint dust cover

    Ball joint dust cover no longer prevents the ingress of dirt

    Major

    2%of tests

  5. Brakes > Rigid brake pipes

    Excessively corroded

    Major

    1%of tests

Hyundai i10 MOT failure rate by year of first registration

Cars first registered in 2020 have the lowest fail rate in this data (6%), and those first registered in 2008 the highest (34%). Years with fewer than 500 tests are left out.

Hyundai i10 tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
20089,08434%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
200937,31128%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
201036,95026%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201133,82823%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
201240,05024%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
201340,86424%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
201445,91018%Suspension > Suspension arms > Ball joint dust coverBall joint dust cover no longer prevents the ingress of dirt
201544,54312%Lamps, reflectors and electrical equipment > Stop lampNot working
201644,2439%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201747,5148%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201842,4108%Lamps, reflectors and electrical equipment > Daytime running lampsNot working
201936,4098%Lamps, reflectors and electrical equipment > Daytime running lampsNot working
20203,0976%Lamps, reflectors and electrical equipment > Daytime running lampsNot working

What to check before you buy a i10

The areas that fail most often on a i10 are lamps, reflectors and electrical equipment, brakes and suspension. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Hyundai i10 MOT: quick answers

What percentage of i10 cars fail their MOT?

17% of 462,502 MOT tests (not retests) on the Hyundai i10 failed in 2024 to 2025, according to DVSA data. That is 2 percentage points below the national average of 19%.

What is the most common MOT failure on a Hyundai i10?

The most common reason is "Lamps, reflectors and electrical equipment > Position lamps > Position lamp: Not working", found in 2% of tests.

Is a Hyundai i10 reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 21,548 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Hyundai MOT failure rates

Compare the i10 with other Hyundai models, or browse MOT failure rates for every model.