KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Hyundai Tucson MOT Failure Rate & Common Faults

10% of Tucson cars failed their MOT in 2024 to 2025, which is 8 percentage points below the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Hyundai Tucson

Fail rate

10%

Pass rate

90%

Tests analysed

226,280

National fail rate

19%

Most common MOT failure reasons for the Tucson

Each reason is shown as a share of all Tucson tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)

    Efficiency below requirements

    Major

    1%of tests

  2. Brakes > Parking brake control > Lever

    Has excessive movement indicating incorrect adjustment

    Major

    1%of tests

  3. Brakes > Brake performance > Parking brake performance > Rbt > Parking brake performance

    Inoperative on one side

    Major

    1%of tests

  4. Suspension > Suspension arms > Pins and bushes

    Pin or bush excessively worn

    Major

    1%of tests

  5. Steering > Steering linkage components > Track rod end

    Ball joint has excessive play

    Major

    1%of tests

Hyundai Tucson MOT failure rate by year of first registration

Cars first registered in 2019 have the lowest fail rate in this data (6%), and those first registered in 2006 the highest (39%). Years with fewer than 500 tests are left out.

Hyundai Tucson tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
20051,78938%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
20061,96039%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
20071,64536%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
20081,00835%Lamps, reflectors and electrical equipment > Position lamps > Position lampNot working
20091,12434%Suspension > Suspension arms > Ball jointBall joint excessively worn
20159,53418%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201640,54013%Steering > Steering linkage components > Track rod endBall joint has excessive play
201747,92311%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201850,0608%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
201951,1696%Suspension > Suspension arms > Pins and bushesPin or bush excessively worn
202016,0916%Steering > Steering linkage components > Track rod endBall joint has excessive play
20212,4016%Brakes > Parking brake control > LeverHas excessive movement indicating incorrect adjustment

What to check before you buy a Tucson

The areas that fail most often on a Tucson are brakes, suspension and steering. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Hyundai Tucson MOT: quick answers

What percentage of Tucson cars fail their MOT?

10% of 226,280 MOT tests (not retests) on the Hyundai Tucson failed in 2024 to 2025, according to DVSA data. That is 8 percentage points below the national average of 19%.

What is the most common MOT failure on a Hyundai Tucson?

The most common reason is "Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp): Efficiency below requirements", found in 1% of tests.

Is a Hyundai Tucson reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 13,726 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Hyundai MOT failure rates

Compare the Tucson with other Hyundai models, or browse MOT failure rates for every model.