KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Peugeot 108 MOT Failure Rate & Common Faults

9% of 108 cars failed their MOT in 2024 to 2025, which is 10 percentage points below the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Peugeot 108

Fail rate

9%

Pass rate

91%

Tests analysed

154,162

National fail rate

19%

Most common MOT failure reasons for the 108

Each reason is shown as a share of all 108 tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Noise, emissions and leaks > Exhaust emissions > Spark ignition > Malfunction indicator lamp

    Inoperative or indicates a malfunction

    Major

    1%of tests

  2. Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)

    Efficiency below requirements

    Major

    1%of tests

  3. Brakes > Brake performance > Service brake performance > Rbt > Service brake performance

    Excessively binding

    Major

    1%of tests

  4. Lamps, reflectors and electrical equipment > Headlamps > Headlamp

    Not working on dipped beam

    Major

    1%of tests

  5. Suspension > Anti-roll bars > Linkage pins and bushes

    Pin or bush excessively worn

    Major

    1%of tests

Peugeot 108 MOT failure rate by year of first registration

Cars first registered in 2022 have the lowest fail rate in this data (1%), and those first registered in 2014 the highest (16%). Years with fewer than 500 tests are left out.

Peugeot 108 tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
201414,18916%Brakes > Brake performance > Service brake performance > Rbt > Service brake performanceExcessively binding
201536,41013%Brakes > Brake performance > Parking brake efficiency (sp) > Rbt (sp)Efficiency below requirements
201634,08710%Noise, emissions and leaks > Exhaust emissions > Spark ignition > Malfunction indicator lampInoperative or indicates a malfunction
201724,1927%Noise, emissions and leaks > Exhaust emissions > Spark ignition > Malfunction indicator lampInoperative or indicates a malfunction
201816,7576%Tyres > Tyre pressure monitoring systemMalfunctioning or obviously inoperative
201910,3293%Brakes > Brake performance > Service brake performance > Rbt > Service brake performanceExcessively fluctuating
20209,2163%Lamps, reflectors and electrical equipment > Headlamps > HeadlampNot working on dipped beam
20218,2572%Lamps, reflectors and electrical equipment > Headlamps > HeadlampNot working on dipped beam
20227231%Lamps, reflectors and electrical equipment > Registration plate lamp(s)Missing in the case of a single lamp or all lamps

What to check before you buy a 108

The areas that fail most often on a 108 are noise, emissions and leaks, brakes and lamps, reflectors and electrical equipment. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Peugeot 108 MOT: quick answers

What percentage of 108 cars fail their MOT?

9% of 154,162 MOT tests (not retests) on the Peugeot 108 failed in 2024 to 2025, according to DVSA data. That is 10 percentage points below the national average of 19%.

What is the most common MOT failure on a Peugeot 108?

The most common reason is "Noise, emissions and leaks > Exhaust emissions > Spark ignition > Malfunction indicator lamp: Inoperative or indicates a malfunction", found in 1% of tests.

Is a Peugeot 108 reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 8,863 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Peugeot MOT failure rates

Compare the 108 with other Peugeot models, or browse MOT failure rates for every model.