KERMO

DVSA MOT data · 2024 to 2025 · normal MOT tests in Great Britain

Peugeot 208 MOT Failure Rate & Common Faults

22% of 208 cars failed their MOT in 2024 to 2025, which is 3 percentage points above the national average of 19%. Below you can see what fails most, and how the picture changes with the year each car was first registered.

Key figures for the Peugeot 208

Fail rate

22%

Pass rate

78%

Tests analysed

353,738

National fail rate

19%

Most common MOT failure reasons for the 208

Each reason is shown as a share of all 208 tests in the period, so the percentages add up to more than the fail rate when a car fails for several things at once. Wear and upkeep items are left out of this list: tyres, brake pads and discs, wiper blades, headlamp aim and washer fluid depend on upkeep and driving, so they say little about the model.

  1. Body, chassis, structure > Transmission > Drive shafts > Joints

    Constant velocity boot split or insecure, no longer prevents the ingress of dirt

    Major

    4%of tests

  2. Noise, emissions and leaks > Exhaust emissions > Spark ignition > Catalyst emissions

    Lambda reading after 2nd fast idle outside specified limits

    Major

    3%of tests

  3. Lamps, reflectors and electrical equipment > Headlamps > Headlamp

    Not working on dipped beam

    Major

    2%of tests

  4. Lamps, reflectors and electrical equipment > Registration plate lamp(s)

    Inoperative in the case of a single lamp or all lamps

    Major

    2%of tests

  5. Suspension > Suspension arms > Ball joint

    Ball joint excessively worn

    Major

    2%of tests

Peugeot 208 MOT failure rate by year of first registration

Cars first registered in 2020 have the lowest fail rate in this data (6%), and those first registered in 2012 the highest (31%). Years with fewer than 500 tests are left out.

Peugeot 208 tests, fail rate and top failure reason by year of first registration
First registeredTestsFail rateTop reason
201227,47031%Body, chassis, structure > Transmission > Drive shafts > JointsConstant velocity boot split or insecure, no longer prevents the ingress of dirt
201363,69130%Body, chassis, structure > Transmission > Drive shafts > JointsConstant velocity boot split or insecure, no longer prevents the ingress of dirt
201456,53226%Noise, emissions and leaks > Exhaust emissions > Spark ignition > Catalyst emissionsLambda reading after 2nd fast idle outside specified limits
201554,20421%Noise, emissions and leaks > Exhaust emissions > Spark ignition > Catalyst emissionsLambda reading after 2nd fast idle outside specified limits
201651,20319%Body, chassis, structure > Transmission > Drive shafts > JointsConstant velocity boot split or insecure, no longer prevents the ingress of dirt
201735,00417%Body, chassis, structure > Transmission > Drive shafts > JointsConstant velocity boot split or insecure, no longer prevents the ingress of dirt
201830,48213%Body, chassis, structure > Transmission > Drive shafts > JointsConstant velocity boot split or insecure, no longer prevents the ingress of dirt
201934,04010%Body, chassis, structure > Transmission > Drive shafts > JointsConstant velocity boot split or insecure, no longer prevents the ingress of dirt
20205676%Suspension > Anti-roll bars > Linkage ball joint dust coverBall joint dust cover no longer prevents the ingress of dirt

What to check before you buy a 208

The areas that fail most often on a 208 are body, chassis, structure, noise, emissions and leaks and lamps, reflectors and electrical equipment. Ask the seller for the MOT certificates and look at those parts first, on a test drive and on a lift if you can.

Run the registration through our free MOT history check to see past advisories and failures for that specific car. A pattern of the same advisory over several tests tells you more than any model average.

Peugeot 208 MOT: quick answers

What percentage of 208 cars fail their MOT?

22% of 353,738 MOT tests (not retests) on the Peugeot 208 failed in 2024 to 2025, according to DVSA data. That is 3 percentage points above the national average of 19%.

What is the most common MOT failure on a Peugeot 208?

The most common reason is "Body, chassis, structure > Transmission > Drive shafts > Joints: Constant velocity boot split or insecure, no longer prevents the ingress of dirt", found in 4% of tests.

Is a Peugeot 208 reliable?

An MOT fail rate is not the same as a breakdown rate. It counts cars that had at least one defect stopping them passing the test. Use it as one signal next to the car's service history and MOT history, and check the areas listed on this page before you buy.

How to read this data

A fail is not a breakdown. An MOT failure means the car had at least one defect that stops it passing the test, such as worn tyres or a faulty lamp. Many failed cars are still driven safely once the job is fixed, and plenty of cars that pass still break down. This page shows what fails the test, not how reliable the car is on the road.

What is counted. Normal MOT tests (not retests) on cars and light vans in Great Britain, from the DVSA anonymised MOT dataset for 2024 and 2025. A car is tested every year, so one car can appear in several years, and the figures count tests rather than individual cars. A test with a pass after work at the test station (PRS) counts as a pass. Years are the year the car was first registered, so an older car is not automatically a worse one.

Severity. “Dangerous” defects are the most serious category in the MOT manual. “Major” defects mean the car fails but is not an immediate danger. The dangerous share next to each reason shows how often that defect was marked dangerous.

Wear and upkeep items. Tyre defects (tread depth, cuts, bulges), brake pads and discs worn below the limit, wiper blades, headlamp aim and washer fluid are not listed as reasons. A test that failed only for these counts as a pass here, because they depend on upkeep and on how the car is driven. For this model, 12,250 tests failed only for these items and were counted this way.

Limits. The dataset is anonymised, so no individual car is shown. Model names are grouped from DVSA's free-text entries, and some variants and trims are merged, so a single model can cover several versions. Northern Ireland tests are not included.

More Peugeot MOT failure rates

Compare the 208 with other Peugeot models, or browse MOT failure rates for every model.